Deye SUN-29.9/30K-SG02HP3-EU-AM3 | 29.9/30kW Three-Phase HV Hybrid Inverter
654.400 Ft
-
Battery
160-700V -
MPPTs
3 -
Max. efficiency
98.5% -
Parallel
10

PV layout
Three roofs, one inverter.
Three MPPTs, with strings arranged 2+2+2, and 36 A on each tracker. A warehouse, a carport, and an east-west field can each hold their own voltage. Max. PV input is 1000 V, and the MPPT window is 150–850 V.
- 3 MPPTs independent trackers
- 6 strings 2 per MPPT
- 36 A per tracker

Storage
75 A into a high-voltage battery.
A lithium battery from 160 V to 700 V charges and discharges at up to 75 A. Charging follows the BMS. Max. efficiency is 98.5%, Euro efficiency is 98.0%, and MPPT efficiency stays above 99%.
- 160–700 V battery voltage
- 75 A charge / discharge
- 98.5% max. efficiency

Phases
Uneven loads, full output.
100% unbalanced three-phase output. A workshop can put the heavier load on one phase while the other two stay lighter, and the inverter keeps feeding all three.
- 100% unbalanced output
- Three-phase 3L + N + PE
- Mixed loads across the phases

Backup
The generator fills the battery.
Energy from a diesel generator can be stored in the battery when the grid is down. Off-grid peak power is 1.5 times rated power for 10 seconds, for a motor start while the generator covers the longer outage.
- Diesel into the battery
- 1.5× rated off-grid peak
- 10 s peak duration

Time of use
Six windows in the working day.
Charging and discharging can be set across six periods. Fill the battery when the tariff is low or the array is strong, and discharge through business hours when the load is high.
- 6 periods each day
- Charge low tariff or strong PV
- Discharge business hours

Expansion
Grow past a single cabinet.
Up to 10 inverters can run in parallel for on-grid and off-grid operation. Batteries can be paralleled as well. Start with one 29.9 kW or 30 kW unit and add cabinets as the load grows.
- 10 inverters in parallel
- On-grid and off-grid same architecture
- Batteries in parallel

Retrofit
Leave the existing array in place.
AC coupling adds this hybrid inverter to a solar system that is already running. The original PV stays in service. The new unit brings battery storage for peak shaving or backup.
- AC coupling retrofit
- Existing PV stays in service
- Battery added for the site

Outdoor plant
Mount it on the plant wall.
Ingress protection is IP65, so the cabinet can sit outdoors. Type II surge protection covers AC and DC. Intelligent air cooling carries the cabinet through a hot working day.
- IP65 outdoor install
- Type II AC and DC surge
- Air cooling intelligent
Technical data
| Parameter | SUN-29.9K-SG02HP3-EU-AM3 | SUN-30K-SG02HP3-EU-AM3 |
|---|---|---|
| Rated AC active power | 29900 W | 30000 W |
| Max. AC apparent power | 29900 VA | 33000 VA |
| Max. PV input power | 47840 W | 48000 W |
| Battery voltage | 160–700 V | 160–700 V |
| Max. charge/discharge current | 75 A | 75 A |
| MPP trackers / strings | 3/2+2+2 | 3/2+2+2 |
| MPPT voltage range | 150–850 V | 150–850 V |
| Max. PV input voltage | 1000 V | 1000 V |
| Max. operating current per MPPT | 36 A | 36 A |
| Max. efficiency | 98.5% | 98.5% |
| Parallel | Max. 10, on-grid and off-grid | Max. 10, on-grid and off-grid |
| Ingress protection | IP65 | IP65 |
| Cabinet size (W×H×D) | 448×688×270 mm | 448×688×270 mm |
| Weight | 46 kg | 46 kg |
