Deye SUN-100/125K-SG02HP3-EU-GM10 | 100–125kW Three-Phase HV Hybrid Inverter

From 2.049.200 Ft

Capacity

100kW 125kW

2.049.200 Ft

Tax included.

Three-phase high-voltage hybrid inverter for commercial and industrial solar-plus-storage. 100 kW and 125 kW, ten MPPTs, dual battery inputs at 100 A each, and up to 10 units in parallel on-grid and off-grid.

Key specifications

Series	SUN-75/80K-SG02HP3-EU-EM6
Rated power	75 / 80 kW three-phase
Max. efficiency	98.7% (Euro 98.1%, MPPT >99%)
Battery	Lithium-ion, 160–1000 V, 80 A + 80 A, 2 inputs
MPPT	6 trackers, 2 strings each (2+2+2+2+2+2), 36 A per tracker
Parallel	Up to 10 units on-grid and off-grid
Ingress protection	IP65
Warranty	5 years, up to 10 years by country

Battery and backup

High-voltage lithium battery range 160–1000 V with two independent inputs at 80 A each. BMS self-adaptation and six charge and discharge periods support time-of-use shifting on a commercial site. Off-grid peak power is 1.5× rated for 10 seconds. Diesel-generator energy can be stored in the battery.

PV and grid

Max. PV input voltage 1000 V, MPPT range 150–850 V, start-up 180 V, rated PV input 650 V. Six MPPTs with two strings per tracker (2+2+2+2+2+2) and 36 A operating current per tracker. Rated AC 220/380 V or 230/400 V, 3L+N+PE. AC coupling for an existing solar system, and 200 A continuous grid-to-load passthrough.

Protection and monitoring

Integrated DC reverse polarity, AC overcurrent, overvoltage and short-circuit protection, thermal protection, anti-islanding, insulation monitoring, residual current detection, DC switch, and Type II surge protection on DC and AC. Optional AFCI. Communication is RS485, RS232 and CAN. Display is LCD and LED. Monitoring is GPRS, Wi-Fi, Bluetooth, 4G or LAN. Operating range −40 to +60°C, with derating above 45°C, up to 3000 m.

Shop safely

Secure your shopping experience with various safe and trusted payment methods.

Shop safely with us

Deye SUN-100/125K-SG02HP3-EU-GM10 | 100–125kW Three-Phase HV Hybrid Inverter

2.049.200 Ft

Battery

160-1000V
MPPTs

10
Max. efficiency

98.7%
Parallel

10

Hybrid plant

100 or 125 kW on one hybrid.

A three-phase high-voltage hybrid for factories, warehouses, and commercial buildings. PV and storage run together on the same unit. Max. efficiency is 98.7%, Euro efficiency is 98.1%, and MPPT efficiency stays above 99%.

100 / 125 kW rated AC power
98.7% max. efficiency
98.1% Euro efficiency

PV layout

Ten trackers for a mixed roof.

Ten MPPTs, two strings on each, 42 A per tracker. A warehouse, a carport, and an east-west field can each hold their own voltage. Max. PV input is 1000 V, and the MPPT window is 150–850 V.

10 MPPTs independent trackers
20 strings 2 per MPPT
42 A per tracker

Storage

Two battery inputs at 100 A.

Lithium batteries from 160 V to 1000 V connect on two inputs at 100 A each. Charging follows the BMS. Use both inputs to move daytime solar into the afternoon peak on a 100 kW or 125 kW site.

160–1000 V battery voltage
100+100 A charge / discharge
2 inputs BMS self-adaption

Expansion

Grow the plant in stages.

Up to 10 inverters can run in parallel for on-grid and off-grid operation. Batteries can be paralleled as well. Start with one 100 kW or 125 kW unit and add cabinets as the load grows.

10 inverters in parallel
On-grid and off-grid same architecture
Batteries in parallel

Time of use

Six windows in the working day.

Charging and discharging can be set across six periods. Fill the battery when the site tariff is low, and discharge when the process load is high.

6 periods each day
Charge low-tariff hours
Discharge process load

Retrofit

Leave the existing array in place.

AC coupling adds this hybrid inverter to a solar system that is already running. The original PV stays in service. The new unit brings battery storage for peak shaving or backup.

AC coupling retrofit
Existing PV stays in service
Battery added for the site

Backup

The generator fills the battery.

Energy from a diesel generator can be stored in the battery when the grid is down. Off-grid peak power is 1.5 times rated power for 10 seconds, for a motor start while the generator covers the longer outage.

Diesel into the battery
1.5× rated off-grid peak
10 s peak duration

Outdoor plant

Outdoor cabinet, surge-protected.

Ingress protection is IP65, so the cabinet can sit outdoors beside a switch room. Type II surge protection covers AC and DC. Intelligent air cooling carries the cabinet through a hot working day.

IP65 outdoor install
Type II AC and DC surge
Air cooling intelligent

SPECIFICATIONS

Technical data

Parameter	SUN-100K-SG02HP3-EU-GM10	SUN-125K-SG02HP3-EU-GM10
Rated AC active power	100000 W	125000 W
Max. AC apparent power	110000 VA	135000 VA
Max. PV input power	160000 W	200000 W
Battery voltage	160–1000 V	160–1000 V
Max. charge/discharge current	100+100 A	100+100 A
MPP trackers / strings	10/2+2+2+2+2+2+2+2+2+2	10/2+2+2+2+2+2+2+2+2+2
MPPT voltage range	150–850 V	150–850 V
Max. PV input voltage	1000 V	1000 V
Max. operating current per MPPT	42 A	42 A
Max. efficiency	98.7%	98.7%
Parallel	Max. 10, on-grid and off-grid	Max. 10, on-grid and off-grid
Ingress protection	IP65	IP65
Cabinet size (W×H×D)	734×1091×344 mm	734×1091×344 mm
Weight	161.7 kg	161.7 kg

Frequently asked questions

Which models are on this listing?

This listing is the 100 kW and 125 kW models. Both have 10 MPPTs with two strings on each tracker, a 160–1000 V lithium battery, and two battery inputs at 100 A + 100 A.

Can I add storage to an existing PV plant?

Yes. AC coupling retrofits this hybrid inverter onto an existing solar system. The original PV stays in place, and this inverter adds battery storage.

Does it support a diesel generator?

Yes. The inverter can store energy from a diesel generator in the battery. Off-grid peak power is 1.5 times rated power for 10 seconds.

What warranty is included?

Standard warranty is 5 years, and it can extend to 10 years.